TMD
MECA CAN DESIGN A TUNED MASS DAMPER (TMD) TO SOLVE YOUR STACK VIBRATION PROBLEMS
TMD
Damping Pad
MECA'S DAMPING PADS OFFER A SIMPLE AND COST EFFECTIVE SOLUTION FOR ADDRESSING VORTEX SHEDDING
Damping Pad
MecaStack
MECASTACK IS THE MOST WIDELY USED SOFTWARE IN THE WORLD FOR SELF AND GUY SUPPORTED STEEL STACKS
MecaStack
MecaWind
CALCULATING WIND LOADS ON ANY BUILDING PER ASCE 7 IS A BREEZE WITH OUR MECAWIND SOFTWARE
MecaWind
MecaLug
MECALUG SOFTWARE WILL AID IN LUG DESIGN AND LIFTING SYSTEM CALCULATIONS FOR A VARIETY OF CONFIGURATIONS
MecaLug
Engineering
MECA ENGINEERS CAN PERFORM THE STRUCTURAL ANALYSIS OF STACKS, COOLERS, AND OTHER PROCESS EQUIPMENT FOR CLIENTS
Engineering
previous arrow
next arrow
 

Welcome to Meca Enterprises

Meca Enterprises is an engineering company developing software for Steel Stack design, Wind Load Calculations and Lifting Lug design.  We also provide engineering services on a variety of process equipment (Stacks, Skids, Air Cooled Heat Exchangers, etc.).  One of the most common problems that occur with steel stacks is wind induced vibration, and so we also offer cost effective alternatives (i.e. dampers) to address stack vibration (vortex shedding) problems.

felix dayan guerra viart
felix dayan guerra viart
2023-10-23
Great software, great customer services, hightailed recommended
leo llanos
leo llanos
2023-10-17
We have been using the program for many years and are very pleased with the results.
ITISAGLN
ITISAGLN
2023-10-16
I just paid for renewal after having the software for a year. It’s been all I need from correct answers, documentation, and customer support. Five stars.
Mike Newell
Mike Newell
2023-10-04
Meca Enterprises was very quick and responsive. Will definitely use them for our ASCE 7-16 calculation software.
Frank Gonzalez
Frank Gonzalez
2023-10-02
We are using the wind load calculation software. Big time saver in otherwise cumbersone and tedious wind calculations using ASCE 7. Would recommend to structural engineers that need to include wind loads on their analysis.
cschror
cschror
2023-09-28
Hands down the best program to calculate wind pressures on a building. Very simple input. Output is for all kinds of structures and situations. The program can calculate pressures on raised buildings on stilts. Simple 3D modeling with pressures drawn with arrows showing exactly what pressure goes where so there is no confusion. Text output file is very detailed and separated by groups to make it very simple to find what you are looking for. Great resource for Engineers and Architects.
Shmulik Zuriel
Shmulik Zuriel
2023-09-26
MecaStack is by far the most user friendly software I have ever seen in this field. The pop-up help windows and the clear visual illustration allow easy and intuitive use. Extended tutorial is accessible and enable profound training. Warmly recommended.
Camilo Andrés Sierra
Camilo Andrés Sierra
2023-09-18
Intuitive and Easy to use. The interface is simple and bears the required information. Support is fast and easy to access.
Alexander Rochell
Alexander Rochell
2023-09-18
Our company has been using MecaWind for several years and we are very satisfied with the results we get from the software. The input is very user-friendly and easy to understand. The new graphic updates have been a major improvement. We love the continuous yearly improvements and updates made to the software!!!
Michele Small
Michele Small
2023-09-08
I had been designing steel stacks for decades prior evaluating the software for use at the company I work for. I found MecaStack to be incredibly mature, flexible and easy to use. It blew away the competition! It is so much faster than the cobbled together proprietary software, hand calculations, spreadsheets, etc. we used prior to acquiring MecaStack. Favorite features include the graphic representation of the stack as it is designed, the ability to turn across wind analysis on and off, and ease of switching between US and SI units on the fly. WELL DONE!!!

WHAT WE DO

INNOVATIONS

Engineering Software

We provide software solutions for Structural Engineers. We offer the only software specifically written for steel stacks in the world and one of the most cost effective wind programs available.

MORE

PERFORMANCE

Stack Vibration Dampers

Meca Enterprises offers Damping Pads and Tuned Mass Dampers (TMD) to solve Vortex Shedding problems commonly known as Stack Vibrations.

MORE

SOLUTIONS

Engineering Services

We can provide Structural Engineering services for stacks, air coolers and other structures. We are licensed in several states as well as Alberta and British Columbia.

MORE

SUPPORT

Questions? We’re here to help

Whether you are a new or existing software client or debating to subcontract your work to Meca, we offer unparalleled support.

MORE

OUR PRODUCTS

MecaStack
Software

MecaStack is the most widely used software in the world for designing self-supported and guy wire supported steel stacks. An easy to use Windows based interface allows designers to quickly model a stack. The user has complete control over the codes that are used for Along Wind, Across Wind, Stress and Fatigue. Load Combinations and factors can be customized as needed.

MORE

MecaWind
Software

MecaWind is a cost effective program used by Engineers and designers to perform Wind calculations per ASCE 7-22, 7-16, 7-10, & 7-05.  The program is simple to use, and offers a professional looking output with all necessary wind calculations. The user also has a great deal of control at their fingertips to customize their output to suit their needs.

MORE

Wind Example
e-Book

Our new EBook provides a detailed set of wind load calculations that illustrate how to calculate wind loads per ASCE 7-10 and ASCE 7-16. In addition, the EBook provides a comparison of the various methods within each standard as well as a comparison in the results obtained following ASCE 7-10 versus ASCE 7-16.

MORE

MecaLug
Software

MecaLug is an easy to use software program effective in designing and analyzing lifting lugs per ASME BTM-1 “Design of Below-the-Hook Lifting Devices”. The program also has the added ability of being able to apply those lugs to a lifting system and analyze what loads would be seen by the crane, cable, and lugs. Making it an all-in-one lifting design software.

MORE

Damping
Pads

Meca provides damping pads for stacks. Generally these are an economical solution for stack heights from about 50 ft [15.2 m] to 150 ft [45.72 m].

It’s a very easily solution to implement on New Stack designs. Damping pads have been used for about 40 years, and have proven to be very reliable.

MORE

Tuned Mass
Dampers (TMD)

A Tuned Mass Damper (TMD) is device that is added to the top portion of the stack that increases the damping of the stack, which will suppress wind induced vibration.

MORE

Tuned Liquid
Dampers (TLD)

Meca has partnerships with companies that design Tuned Mass Dampers (TMD) and Tuned Liquid Dampers (TLD). These are typically used on stacks that are 150 ft [45. m] and taller. There are many factors that determine whether a TMD or TLD is more appropriate.

MORE